Frequently Asked Questions

To attach hose and wands, push into mating part.

To detach, press latch button and pull apart.To detach hose from unit, squeeze latch buttons and pull apart.

Cord quick release closed. Place one hand on top of unit to stabilize before wrapping or unwrapping cord.

For fast, easy removal of entire cord, rotate cord quick release 180° to release cord

To partially unwrap cord, leave quick release in place. Unwrap cord to desired length.

Connect to outlet.

To disconnect, remove cord from outlet.

To rewrap cord, place quick release in closed position. Wrap cord around base of unit. Attach plug to cord.

Slide into wand/handle.

Clean hard floors.

To detach, press latch button and pull.

Slide into wand/handle.

Clean between cushions and other tight spaces.

To detach, press latch button and pull.

Slide into wand/handle.

Adjust tool.

Clean Sofa arms, pillows, blankets, clothing, car interiors, etc.

To detach , press latch button and pull.

Push button to Stop unit.

Lift hood and remove.

Lift tabs on filter to remove.

Attach hose.

Push button to Start unit.

Blow debris from under furniture.

Fill inflatables.

To unclog hose put handle in suction port.

Push button to Stop unit.

Slide into wand/handle.

Adjust tool.

Clean table tops and books.

Clean curtains.

To detach, press latch button and pull.

Steer the Power Brush extension around chair or table legs.

Select OFF and remove power cord from outlet.

Turn Power Brush over, gently remove object.

Push RESET button on Power Brush.

Replace power cord and select ON to restart.

Top handle.

Front Handle.

At the rear of the unit, pull latch to open lid.

Remove paper liner.

Discard paper liner.

Insert clean paper liner.

Periodically clean cloth liner.

Change filter after every 6 bags.

Push button to Stop unit and remove power cord from outlet. Lift hood and remove.

Lift tabs on filter to remove. Discard used filter.

Place filter over opeining and push to lock tabs. Replace hood.

Replace power cord and push button to Start unit.

Open unit and remove Paper Filter Bag and Cloth Dust Bag.

Remove plastic filter cover and foam filter from motor.

Wash foam filter with mild soap and allow to air dry.
DO NOT Insert Wet Foam Filter Into unit.

Replace foam filter on motor and snap plastic filter cover in place.

Replace Cloth Dust Bag and Paper Filter Bag. Close lid.

Simple, easy storage of entire unit in a dry place.

Clean and wipe with non-abrasive cleaner.

Clean and wipe hose and wand ends.